Retention of Cr(III) by high-performance chelation ion chromatography interfaced to inductively-coupled plasma mass spectrometric detection with collision cell

High-performance chelation ion chromatography (HPCIC) was employed to retain cationic Cr(III) on an anion-exchange column and hence allow the separation of the two most prevalent forms of chromium, Cr(II) and Cr(VI). A mobile phase of nitric acid was utilized at pH = 1.5; additionally, 2,6-pyridinedicarboxylic acid was used at a concentration of 6 mM. Additives with different structural characteristics were used in an effort to elucidate retention mechanisms. Inductively-coupled plasma mass spectrometry was used for chromium detection. A collision cell was utilized to reduce chloride-based polyatomic ions that may interfere with the detection of Cr(III), and a detection limit study yielded levels in the low part-per-billion range. The newly developed method was applied to the chromatographic analysis of samples of an incubation medium containing Cr(VI) incubated with cell nuclei.     

Atom transfer radical homo‐ and block copolymerization of methyl 1‐bicyclobutanecarboxylate

A non‐olefinic monomer, methyl 1‐bicyclobutanecarboxylate (MBC), was successfully polymerized by the controlled/“living” atom transfer radical polymerization (ATRP) technique, resulting in a well‐defined homopolymer, PMBC, with only cyclobutane ring units in the polymer chain. An AB block copolymer poly(methyl 1‐bicyclobutanecarboxylate)‐b‐polystyrene (PMBC‐b‐PS), having an all‐ring unit segment, was also synthesized with narrow polydispersity and designed number‐average molecular weight in addition to precise end groups. The ¹H NMR spectra, glass‐transition temperature, and thermal stability of PMBC, PMBC‐b‐PS, and PS‐b‐PMBC were investigated. The experimental results showed that the cyclobutane rings in the two block polymers improved their thermal stability. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1929–1936, 2002     

Synthesis and characterization of active ester-functionalized polypyrrole-silica nanoparticles: application to the covalent attachment of proteins

Novel ester-functionalized polypyrrole-silica nanocomposite particles were prepared by oxidative copolymerization of pyrrole and N-succinimidyl ester pyrrole (50/50% initial concentrations), using FeCl3 in the presence of ultrafine silica nanoparticles (20 nm diameter). The N-succinimidyl ester pyrrole monomer was prepared in aqueous solution using 1-(2-carboxyethylpyrrole) and N-hydroxysuccinimide in the presence of 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide. The resulting nanocomposites (N-succinimidyl ester polypyrrole-silica) are raspberry-shaped agglomerates of silica sol particles "glued" together by the insoluble poly(pyrrole-co-N-succinimidyl pyrrole). The N-succinimidyl ester polypyrrole-silica particles were characterized in terms of their size, density, copolymer content, and polydispersity. Scanning electron microscopy and disk centrifuge sedimentometry confirmed that the nanocomposite particles had narrow size distributions. X-ray photoelectron spectroscopy analysis indicated a silica-rich surface and a high surface concentration of N-succinimidyl ester groups. These nanoparticles exhibited good long-term dispersion stability. The chemical stability of the ester functions in aqueous media after several weeks of storage was monitored by FTIR spectroscopy. The functionalized nanocomposites were tested as bioadsorbents of human serum albumin (HSA). The very high amount of immobilized HSA determined by UV-visible spectroscopy is believed to be due to covalent binding. Incubation of the HSA-grafted nanocomposite with anti-HSA resulted in immediate flocculation, an indication that they are alternative candidates for visual diagnostic assays.     

Syntheses and structural studies on two cycloruthenapentadienyl complexes: [(CO)3RuC4(CH2OH)4]Ru(CO)3·H2O and [(CO)3RuC4(CH2CH2OH)2(C2H5)2]Ru(CO)3

Syntheses and single-crystal X-ray diffraction studies have been completed on two cycloruthenapentadienyl (CO)₆Ru₂L₂ derivatives, with L = CH₂OHC = CCH₂OH and C₂H₅C=CCH₂CH₂OH respectively. Crystal data are as follows: for [(CO)₃RuC₄(CH₂OH)₄]Ru(CO)₃·H₂O, P2₁/c, a 13.72(1), b 9.501(4), c 14.86(1) Å, β 101.10(6)°, R_w = 0.052 for 1911 reflections; for [(CO)₃RuC₄(CH₂CH₂OH)₂(C₂H₅)₂]Ru(CO)₃, P2₁/c, a 9.191(3), b 16.732(4), c 14.903(3) Å, β 113.61(4)°, R_w = 0.042 for 2865 reflections. Both compounds are built up from binuclear units, each unit being regarded as a Ru(CO)₃ fragment π-bonded to a cycloruthenapentadienyl ring. The molecular parameters are compared with those of known cyclometallapentadienyl complexes of transition metals. The presence of a semi-bridging CO group is discussed.     

Indium(III) one-dimensional polymers with pyrazine and pyrazine, 2-carboxylic acid as the spacer molecules

The reactions of indium(III) chloride tetrahydrate with pyrazine (C₄H₄N₂) and pyrazine, 2-carboxylic acid afford two polymeric frameworks, the structures of which were characterized in the solid state by single crystal analysis. The former is a one-dimensional infinite structure interlinked by the pyrazine spacer, while the latter is a one-dimensional ‘zigzag’ polymeric structure. A dimeric indium(III) pyrazine complex is also reported.     

Hydroxyapatite-poly(d,l-lactide) Nanografts. Synthesis and Characterization as Bone Cement Additives

This paper reports the creation of hydroxyapatite/polyester nanografts by “graft-from” polymerization of d,l-lactide with [Ca₅(OH)(PO₄)₃]₂ as the initiator and tin(II)-2-ethylhexanoate as the catalyst. Model polymerizations were performed with cyclooctanol as initiator to confirm the grafting on the surface of the hydroxyapatite nanocrystals. Polymers with the highest molecular mass (M_n) between 4250 Da (cyclooctanol) and 6100 Da (hydroxyapatite) were produced. In both cases the molecular mass distributions of the polymers formed were monomodal. The materials obtained were characterized by size-exclusion chromatography, NMR and FT-IR spectroscopy, and thermal methods. Their suitability as additives for commercial bone cement (Simplex P Speedset, Stryker Orthopaedics) has been confirmed by thermal analysis techniques and mechanical testing. The results obtained show that addition of the hydroxyapatite/ polyester nanografts improved both thermal and mechanical properties of the bone cement.     

Alkyl-Diol Silica (ADS): restricted access precolumn packings for direct injection and coupled-column chromatography of biofluids

The direct and repetitive injection of untreated biological fluids (e.g., hemolyzed blood, plasma, serum, cell culture and tissue homogenates) onto an HPLC-system and the subsequent analysis of low-molecular weight compounds (e.g. drugs, xenobiotics, metabolites) is rendered possible by a coupled-column configuration and special precolumn packings. For this purpose a new family of chemically and enzymatically tailored reversed-phase packing materials have been prepared. The LC-integrated sample clean-up with these restricted access (bimodal) phases is based on the complete nonadsorptive size exclusion of macromolecules (e.g. proteins) and on the simultaneous dynamic partitioning of the target molecules. The bonded phase which exclusively covers the internal pore surface of a glyceryl-modified silica is a butyryl-(C-4), capryloyl-(C-8) or stearoyl-(C-18) moiety. These ligands allow a classical reversed-phase or ion-pair chromatography during the sample work-up step. The capacity of the n-alkyl phase is comparable with conventional silica based RP-materials. The broad hydrophobic retentive capability of these packings allows the extraction of a wide variety of compounds of biomedical interest. The electroneutral and hydrophilic particle exterior (glyceryl-residues) was generated using either soluble or immobilized enzymes (lipase, esterase) which cleave the fatty acid esters exclusively at the outer surface. Unwanted macromolecular components of a sample (e.g. proteins) are quantitatively eluted in the void volume due to the restricted access given by the pore size (6 nm) and the nonadsorptive external diol coverage. The lifetime of a precolumn (25 × 4 mm I.D.) packed with these novel bimodal, i.e. RP-SEC phases exceeds more than 200 injections of 500 l plasma. In addition to the synthesis, this paper describes an application of each of these Alkyl-Diol Silica (ADS) precolumn packings in fully automated coupled-column HPLC systems for the analysis of drugs and endogenous compounds in different biological matrices.Dedicated to Professor Dr. Dr. h.c. mult. J.F.K. Huber on the occasion of his 70th birthday     

Total synthesis of erythromycin B

We report the details of the first total synthesis of erythromycin B using two different strategies for the end game. The first of these follows a classical approach in which the desosamine and cladinose residues are sequentially appended to a macrocyclic lactone, which was formed by cyclization of a seco acid derivative, to give a bis-glycosylated macrolide intermediate that is converted into erythromycin B. The second strategy features an abiotic approach in which a seco acid bearing a desosamine residue is cyclized to give a monoglycosylated macrocyclic lactone that is then transformed into erythromycin B via a sequence of steps involving refunctionalizations and a glycosylation to introduce the cladinose moiety. Attempts to prepare a bis-glycosylated seco acid by de novo synthesis were unsuccessful. The syntheses of the key seco acid intermediates feature the oxidative transformation of a furan containing C(3)-C(10) to provide a dioxabicyclo[3.3.1]nonenone that served as a template on which to create the stereocenters at C(6) and C(8). A stereoselective aldol reaction was used to establish the C(11)-C(15) segment, and a stereoselective crotylation was implemented to introduce the propionate subunit comprising C(1)-C(2).